Assembling The Ab-Gym - PowerPeak FAG8239P Mode D'emploi

ASSEMBLING THE AB-GYM

Parts (check that you have all of the parts when unpacking the Ab-Gym)
1. 1 Frame
2. 1 Foot rest
3. 2 Handles
4. 4 Assembly screws
5. 1 Head rest
Headrest
STEP ONE:
Remove all of the parts of the Ab-Gym from the packaging.
STEP TWO:
Take the frame and fold out the front and back legs as far as they will go.
STEP THREE:
Press 'pop pin' in and make sure that the foot rest is the right length. Make sure that
the 'pop pin' is inserted in the right hole.
STEP FOUR:
Assemble the handles using the assembly screws.
Frame
15
Handle
Foot rest