Aer485 Connection With Gr03, Aerweb30 And Aermodem; Aer485 Connection With Gr03, Aerweb30 And Aermodem Gsm - AERMEC AER485 Mode D'emploi

AER485 connection with GR03, AerWeb30 and AerModem

The supplied ferrite must be introduced onto the serial connection cable,
positioning it close to the AER485 card. The installation of the ferrite must
be carried out by twisting the cable around the ferrite two times.
The serial connection between AER485
and AerWeb 30, must be carried out
using shielded two-pole cable (connecting
the shielding to earth); the name of the
control board for the serial connection is
CONN1; The poles indicated on the card
represent:
Pole A = POSITIVE POLE;
Pole B = NEGATIVE POLE;

AER485 connection with GR03, AerWeb30 and AerModem GSM

The supplied ferrite must be introduced onto the serial con-
nection cable, positioning it close to the AER485 card. The
installation of the ferrite must be carried out by twisting the
cable around the ferrite two times.
The serial connection between AER485
and AerWeb 30, must be carried out
using shielded two-pole cable (connecting
the shielding to earth); the name of the
control board for the serial connection is
CONN1; The poles indicated on the card
represent:
Pole A = POSITIVE POLE;
Pole B = NEGATIVE POLE;
16
1
8
2
3
FUSE
CONN1
Key
1 - GR03 card
2 - 10-way flexible flat cable
3 AER485 card
1
8
3
FUSE
2
CONN1
Key
1 - GR03 card
2 - 10-way flexible flat cable
3 AER485 card
4 - AerWeb 30
5 - AerModem
Serial connection,
terminals 7 and 8
9
-
+
4
4 - AerWeb 30
5 - AerModem GSM
6 - Antenna GSM with cable
Power supply connection,
terminals 10 and 12
Serial connection,
terminals 7 and 8
9
-
+
4
6 - Telephone cable
7 - RS485 serial connection
8 - Serial connection
9 - Ferrite
Power supply connection,
terminals 10 and 12
230V
~
5
6
7
7 - RS485 serial connection
8 - Serial connection
9 - Ferrite
6
230V 50Hz
~
7
5
50Hz