18.1 Appliance diagram
caso SV200
Place the bracket (B) at edge of cooking vessel and fix the screw
(C).
Place the device (A) into the bracket.
Fill water into the cooking vessel and observe min-/max-marking
at device.
Plug in the power plug into outlet after this.
Refill probable evaporated water during
use, so that always water is filled into
cooking vessel up to min-marking.
Otherwise the device could be damaged.
The the cooking vessel should not be
covered with a lid. Use a cooking vessel
with capacity 6 – 19 L.
Risk of crushing!
Warning
35