Getting Started; Packaging Safety Information - CASO DESIGN SV200 Mode D'emploi

Cuiseur sous vide
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 42
Danger
Do not operate this device if its power cable or plug is
damaged, if it does not work properly or if it is damaged or
has been dropped. If the power cable is damaged, it will
need to be replaced by the manufacturer or his service
agency or a similar qualified person, to avoid any dangers.
Do not open the housing on the device under any
circumstances. There is a danger of an electrical shock if
live connections are touched and the electrical or
mechanical structure is altered. In addition, functional faults
on the device can also occur.
Before plugging the appliance in or when you operate it,
make sure your hands are dry.
Remove the plug from the wall socket when the unit is
not in use, and also before cleaning.
Never immerse the control element into liquid. Keep the
cord of device away from water. Dive only the heating
element of the device into water. Observe the min- and
max-marking of the device when you fill the cooking vessel.
If the entire device and/or control element was in contact
with water, then pull the power plug and send the device to
customer service. Attention: Risk of electrical shock.

16 Getting Started

This chapter will guide you through safely unpacking and setting up your new unit.

16.1 Packaging safety information

DANGER
Packaging materials are not toys and should be disposed of properly.
► Do not allow children to play with packaging materials due to risk of suffocation.
caso SV200
32

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1308

Table des Matières