Milwaukee 4555-22 Manuel D'utilisateur page 23

EVAPORATIVE EMISSION CONTROL WARRANTY STATEMENT
Your new MILWAUKEE brand gasoline powered product complies with all applicable U.S. EPA, Environment Canada,
and State of California emissions regulations.
The evaporative emissions portion of this coverage, as described below, is provided by Milwaukee Electric Tool Cor-
poration. Separate emissions warranty coverage for other emissions related components is provided by the engine
manufacturer, as stated in a separate "Emission Control System Warranty" included with this product. Of course,
this product also includes a warranty that is not limited to emissions related components, as described elsewhere in
this operator's manual.
CALIFORNIA EVAPORATIVE EMISSION CONTROL WARRANTY STATEMENT
The California Air Resources Board and Milwaukee Electric Tool Corporation, are pleased to explain the evaporative
emission control system's warranty on your 2006 model year pressure washer. In California, new equipment that
uses small off-engines must be designed, built, and equipped to meet the State's stringent anti-smog standards.
Milwaukee Electric Tool Corporation must warrant the evaporative emission control system on your pressure washer
for the period listed below, provided there has been no abuse, neglect or improper maintenance of your equipment.
Your evaporative emission control system may include parts such as: carburetors, fuel tanks, fuel lines, fuel caps, valves,
canisters, filters, vapor hoses, clamps, connectors, and other associated components. For engines less than or equal
to 80 cc, only the fuel tank is subject to the evaporative emission control warranty requirements of this section.
MANUFACTURER'S WARRANTY COVERAGE:
This evaporative emission control system is warranted for two years. If any evaporative emission-related part on your
equipment is defective, the part will be repaired or replaced by Milwaukee Electric Tool Corporation.
OWNER'S WARRANTY RESPONSIBILITIES:
As the pressure washer owner, you are responsible for performance of the required maintenance listed in your
owner's manual. Milwaukee Electric Tool Corporation recommends that you retain all receipts covering mainte-
nance on your pressure washer, but Milwaukee Electric Tool Corporation cannot deny warranty solely for the lack
of receipts.
As the pressure washer owner, you should, however, be aware that Milwaukee Electric Tool Corporation may deny
you warranty coverage if your pressure washer or a part has failed due to abuse, neglect, or improper maintenance
or unapproved modifications.
You are responsible for presenting your pressure washer to a Milwaukee Electric Tool Corporation distribution
center or service center as soon as the problem exists. The warranty repairs should be completed in a reasonable
amount of time, not to exceed 30 days.
If you have a question regarding your warranty coverage, you should contact Milwaukee Electric Tool Corporation at
1-800-729-3878.
WARRANTY
YOUR WARRANTY RIGHTS AND OBLIGATIONS
page 23