... you can't switch on WiFi
Please check that the WiFi/WLAN module is firmly plugged in inside the housing of
your appliance.
Procedure: Remove cover A on the back of the appliance, check that WiFi/
i
WLAN module B is correctly installed.
A
Pull both locking tabs up.
A
A
Then re-fit cover A. You should hear the two locking tabs snap into place.
... the LED strip flashes yellow?
This indicates that an automatic firmware update is taking place.
or Bluetooth
A
Tilt the cover towards you
and pull down to remove.
A
on the display of your appliance?
B
Module B must be firmly
plugged in inside the hous-
ing.
EN
37