Product Description - PLYMOVENT CB-SCS/PLC Manuel Opérateur

ENGLISH
PREFACE
Using this manual
This manual is intended to be used as a work of reference for
professional, well trained and authorised users to be able to
safely install, use, maintain and repair the product mentioned
on the cover of this document.
Pictograms and symbols
The following pictograms and symbols are used in this manual:
TIP
Suggestions and recommendations to simplify
carrying out tasks and actions.
ATTENTION!
A remark with additional information for the user. A
remark brings possible problems to the user's
attention.
Service and technical support
For information about specific adjustments, maintenance or
repair jobs which are not dealt with in this manual, please
contact the supplier of the product. He will always be willing to
help you. Make sure you have the following specifications at
hand:
- product name
- serial number
These data can be found on the identification plate.
1 INTRODUCTION
1.1 Identification of the product
The identification plate contains the following data:
• product name
• serial number
• supply voltage and frequency
• power consumption
1.2 General description
The CB-SCS/PLC [CB-6000-MS/PLC]
plate with attached multifunctional control box with PLC and a
pressure reducing valve with oil/water separator. The CB-SCS/
PLC [CB-6000-MS/PLC] is being used in filter systems with a
SCS [Statiflex 6000-MS].
The CB-SCS/PLC [CB-6000-MS/PLC]
extraction and filtration systems:
• push-pull systems
• multiple arm systems
• extraction systems for cutting tables
1.3 Product combinations
The CB-SCS/PLC [CB-6000-MS/PLC]
product:
• central filter system SCS
1.4 Options and accessories
There are no options and/or accessories available for the CB-
SCS/PLC [CB-6000-MS/PLC].
0507200190/CB-SCS/PLC [CB-6000-MS/PLC]/111109/C
consists of a mounting
is suitable for the following
is used with the following
[Statiflex 6000-MS]
1.5 Technical specifications
Article number
Dimensions:
- control box (incl. grommets)
- mounting plate
Connection voltage
Power consumption
Pressure difference switch "
Pressure difference switch "
Fuse
Compressed air supply
Compressed air connection
Compressed air quality
Insulation class
Program PLC
1.6 Ambient conditions
Min. operating temperature
Nom. operating temperature
Max. operating temperature
Max. relative humidity
2

PRODUCT DESCRIPTION

2.1 Components
Fig. 2.1
The CB-SCS/PLC [CB-6000-MS/PLC]
main components:
A control panel
B housing
C connection grommets
D pressure reducing valve with oil/water separator
E pressure switch monitoring presence of compressed air
F pressure difference switch "
G pressure difference switch "
H PLC
B
D
E
F
Fig. 2.1: Main components
7900020420
- 297 x 270 x 125 mm
- 380 x 280 x 86 mm
24 VAC/50-60Hz
50W
" default 25 mbar (2500 Pa)
HIGH
" default 15 mbar (1500 Pa)
LOW
2,0 A-T
6 bar
quick connect coupling
dry and oil-free
IP 66
version SCS-PLC 2.1
5°C
20°C
45°C
80%
consists of the following
"
HIGH
"
LOW
alarm
standby
cleaning
alarm
reset alarm
A
C
H
G
EN - 6