11- Furling Tips - Facnor LS Mode D'emploi

11- FURLING TIPS

•
When you reef, check the Genoa car to ensure the correct tension on the
leach and foot.
•
Keep the Genoa halyard tight when furling in and out. Do not tight
excessively the halyard; stop tightening as soon as the folds in the sail have
disappeared.
•
Before leaving your boat, make sure that the sail is tightly furled and that the
jib sheets are wrapped around the furled sail two or three times, and the reefing line
is secured.
•
When reefing in light airs, maintain some tension on the jib sheets to ensure
the sail is properly rolled up.
•
Slack the halyard at the harbour.
•
Regarding maintenance, please see page 21.
•
In case of difficult rotation, check that no halyard (Spinnaker halyard for
instance) is interfering.
DO NOT FORCE
Above all DO NOT USE the winch to furl in. Please contact your Facnor distributor.
Please do not hesitate to contact our experienced sales team or the
FACNOR dealers whose list is available on our web site :
www.facnor.com and discover the wide range of FACNOR products.
F a c n or - In s ta l l a ti on m a n u a l r e v 2 0 1 9 – L S /L X/ R X r e e f i n g a n d f u r l i n g s ys te m s
the reefing system. Check for reasons if the sail is difficult to furl.
www.facnor.com
ENJOY YOUR SAILING
English
!
31