Table des Matières
Publicité
Getting started
1. Before first use. Remove all adhesive
GB
remains and gently rub with a
dampened cloth. Rinse water tank
to remove foreign particles. When
turned on for the first time, temporary
vapours/odours may occur.
4. Using the steam function. Set
temperature selector to
Move the steam selector to
22
2. Filling steam iron with water.
Make sure plug is removed from
power outlet. Turn steam selector to
Dry setting and open filling aperture
cover. Fill water up to maximum level.
Close cover.
5. Using the steam jet function. To use
or
.
the steam jet function, ensure that
.
tank is at least 1/2 full. Set temperature
selector to
button several times to prime pump.
3. Plug power cable into a power
6. Steaming hanging items. Vertical
.
Press steam jet
outlet. Power indicator light turns
on. Set temperature by turning
temperature selector to adequate
choice. When the light turns off, iron is
ready to be used.
steam jet function is ideal for steaming
curtains, suits and delicate fabrics.
Hang item on a hanger, hold iron at a
distance of 10–20 cm and press steam
jet button.
Publicité
Table des Matières
