Important - Greenlee POWER FINDER 2007 Manuel D'instructions Et De Sécurité

Prior to plugging the transmitter into the circuit to be traced,
use an approved voltage tester, such as the Greenlee 6706,
6708, or 6709, to determine the voltage present. If the voltage
is less than 300 volts AC or DC, you may continue.
Do not connect the PowerFinder to power in excess of 300
volts! Connecting to more than 300 volts will cause damage to
the unit.
EXAMPLE 2
Connection to a live receptacle supplied by more than 120 volts
(208, 220, 230, 240, etc.)
1) Using the transmitter adapter plug, connect one alligator clip to
one of the receptacle blades by opening the clip slightly and
fastening it to the small prong inside the round portion of the
receptacle blade.
Connect the other alligator clip to the other receptacle blade in
the same fashion.
Greenlee Textron Inc. / Subsidiary of Textron Inc.
2007 POWER FINDER™ Circuit Tracer

IMPORTANT

4455 Boeing Dr., Rockford, IL 61109-2988 USA 815/397-7070
10