Maintenance And Care; Outdoor Heat Exchanger; Drain Pipe; Notice Before Seasonal Use - Gree GMV-680WM/E-X Manuel D'utilisateur

GMV DC Inverter VRF
Status:
Error Code
A0 Unit waiting for debugging
Refrigerant recovery operation of
A2
after-sales
A3 Defrosting
A4 Oil-return
A6 Heat pump function setting
A7 Quiet mode setting
A8 Vacuum pump mode
AH Heating
AC Cooling
AL Charge refrigerant automatically
AE Charge refrigerant manually
AF Fan
AJ Cleaning reminding of filter
Debugging confirmation when
AP
starting up the unit
AU Long-distance emergency stop
Ab Emergency stop of operation
Ad Limit operation
An Child lock status

8 Maintenance and Care

Regular check, Maintenance and care should be performed every six months by
professional personnel, which will prolong the unit life span.Disconnect the power supply
before cleaning and maintenance.

8.1 Outdoor Heat Exchanger

Outdoor heat exchanger is required to be cleaned once every six months. Use vacuum
cleaner with nylon brush to clean up dust and sundries on the surface of heat exchanger. Blow
away dust by compressed air if it is available. Never use water to wash the heat exchanger.

8.2 Drain Pipe

Regularly check if the drain pipe is clogged in order to drain condensate smoothly.

8.3 Notice before Seasonal Use

(1) Check if the inlet/outlet of the indoor/outdoor unit is clogged.
(2) Check if the ground wire is earthed reliably.
(3) Check if battery of remote wireless controller has been replaced.
(4) Check if the filter screen has been set soundly.
(5) After long period of shutdown, open the main power switch 8 hours before reoperating
the unit so as to preheat the compressor crankcase.
(6) Check if the outdoor unit is installed firmly. If there is something abnormal, please
Copyright 2018. This translation is property of GREE PRODUCTS SL. All rights reserved. Total or partial reproduction without its express authorization is prohibited.
Content
67
Error Code
Ay Shielding status
n0 SE operation setting of system
n3 Compulsory defrosting
Limit setting for max. capacity/output
n4
capacity
Compulsory excursion of
n5
engineering code of IDU
n6 Inquiry of malfunction
n7 Inquiry of parameters
n8 Inquiry of project code of IDU
n9 Check quantity of IDU on line
nA Heat pump unit
nH Heating only unit
nC Cooling only unit
nE Negative code
nF Fan model
High temperature prevention when
nJ
heating
Eliminate the long-distance shielding
nU
command of IDU
nb Bar code inquiry
Length modification of connection
nn
pipe of ODU
Content