Klarstein Bern Mode D'emploi page 46

EN
46
4. Press TIMER button the fourth time to set the minutes, you can adjust the minutes
by pressing plus and minus button. You will finish setting the Monday timer setting
after four time setting operation.
5 Press the TIMER button again you can setting the on-off situation on Tuesday. The
operation method is same as Monday.
Note: When you finish to set the whole week, the digital tube will show the ambient
temperature. This indicate the setting have been finished.
Disabling the timer on a certain day of the week
If you do not want to set the on-off timer on a certain day of the week, you need to press
the timer key continuously for four times to skip this day.
Example: you do not need to set on-off status on Tuesday. When the Monday timer
setting is finished, press the timer setting key, then you could set Tuesday. [ON] and
[MON] will disappear. Instead, [ON] and [TUE] will lit up. At the same time, the first
two digits begin to flash on the screen. In this case you should not press [+] or [-] button
to set time. Press the TIMER button again. At the same time, the second two digits begin
to flash on the screen. In this case you should not press [+] or [-] button to set time. Press
the TIMER button again. The [ON] icon on the display board will disappear while [OFF]
icon lit up and the digit tube will transfer to Wednesday set.
Note: The same day timing and weekly timing conflict, according to the principle of
first switch to the first set, all settings need memory function
Child lock
The child safety lock is adjustable from remote control only. Holding the child safety lock
button for 5 seconds disables or enables all functions on the control panel and remote
control.