Using The Pouring Shield; Using Your Kitchenaid ® Beater Attachments - KitchenAid Pro Line FVSFGA Manuel D'utilisation

USING YOUR STAND MIXER
Using the pour_ing shield*
Attaching the Pour_ing Shield
1. Make sure the speed control lever
is set to the OFF/O position.
2. Unplug the Stand Mixer.
3. Attach desired accessory and raise
the mixing bowl.
4. Slide pouring shield collar around
beater shaft, centering collar over
rim of bowl.
Using the Pour_ing Shield*
Pour ingredients into the mixing bowl
through the chute portion of shield.
IMPORTANT: Make sure the guides
on the bottom of the chute rest on
the rim of the bowl to keep ingredients
from falling outside the bowl as they
are added.
*Included with some models.
Using your_ KitchenAid
Flat Beater for normal to heavy mixtures:
cakes
creamed frostings
candies
cookies
pie
Wire Whip for mixtures that need air incorporated:
eggs
egg whites
heavy cream
boiled frostings
PowerKnead™ Spiral Dough Hook for mixing and kneading yeast doughs:
breads
rolls
pizza dough
Removing the Pour_ing Shield
1. Make sure the speed control
lever is set to the OFF/O position.
2. Unplug the Stand Mixer.
3. Slide the pouring shield off the
bowl.
4. Lower the bowl support by
turning the bowl-lift lever down.
5. Remove accessory and the
mixing bowl.
beater_ attachments
®
biscuits
quick breads
meat loaf
mashed potatoes
pastry
sponge cakes
angel food cakes
mayonnaise
some candies
coffee cakes
buns
Pouring Chute
9