habitat et jardin Family XXL Manuel D'installation page 11

Step 9.
◆ Place straight side of the support bar for bottom slide chute (V) outward.
◆ Secure the support bar for bottom slide chute (V) to bottom wavy slide chute (M) with hardware
(Upper of support bar (V): bolt Dx1 + washer Fx1 + spring washer Gx1 + domenut Hx1).
◆ Secure the support bar for bottom slide chute (V) to the cross tie bar (O) with hardware
(Lower of support bar (V): bolt Ex1).
◆ While one adult is connecting the support bar with slide chute, the other adult
can assist by holding the slide chute.
Step 10.
◆ Attach the ladder stabilizer bar (P) to the pre-assembled ladder with hardware
(bolt Cx1 + washer Fx1 + spring washer Gx1 + domenut Hx1).
◆ Secure the tie bar (N) to ladder stablilizer bar (P) with hardware
(bolt Cx1 + washer Fx1 + spring washer Gx1 + domenut Hx1).
While one adult is connecting ladder stabilizer with ladder, the other adult
◆
can assist by holding the slide chute.
Upper
Lower
U
V
Straight side is outward.
D (M6x20) 2x
E (M6x15) 2x
F (M6)
G(M6)
H(M6)
C (M6x35) 3x
F (M6)
G(M6)
H(M6)
2x
2x
2x
3x
3x
3x