Product Description; Specifications - Shindaiwa M242 EVC Manuel D'utilisation

Product Description

Using the accompanying illustrations as a
guide, familiarize yourself with your unit
and its various components. Understanding
your unit helps ensure top performance,
long service life, and safer operation. See
Figure 2 and 2a.
WARNING!
Do not make unauthorized modifica-
tions or alterations to any of these units
or their components.
Prior to Assembly
Before assembling, make sure you have all
the components required for a complete
unit:
 Engine/Outer tube assembly
 Handle
 Kit containing handle mounting bracket
and hardware, this owner's/operator's
manual and tool kit for routine mainte-
nance. Tool kits vary by model and may
include a hex wrench, spark plug/screw-
driver combination wrench, and scraper.
Carefully inspect all components for damage.

Specifications

M242 Multipurpose Tool Carrier dry weight
(less attachments)...........................................................4.3 kg/9.5 lb.
Engine model .............................................................................S242E
Engine type..................................................................2-cycle catalyst
Bore x stroke................................................1.3 x 1.1 in./33 x 28 mm
Displacement ..........................................................1.5 cu. in./23.9 cc
Maximum power............................1 HP/0.8 kW @ 8000 rpm (min
Fuel/oil ratio...........50:1 with ISO-L-EGD or JASO FC class 2-cycle
Fuel tank capacity........................................................21.0 oz./620 ml
Carburetor type..................................Walbro WYK, diaphragm-type
Ignition.............................One-piece electronic transistor-controlled
Spark plug...............................................................................BPMR6A
Specifications are subject to change without notice.
M242 Multipurpose
Tool Carrier
Outer Tube
Coupler
Figure 2
IMPORTANT!
The terms "left", "left-hand", and "LH";
"right", "right-hand", and "RH"; "front" and
"rear" refer to directions as viewed by the
operator during normal operation.
Air cleaner type.........................Non-reversible foam filter element
Starting method.........................................................................Recoil
Stopping method..............................................................Slide switch
Transmission type................................Automatic centrifugal clutch
EPA Emission Compliance Period*................................Category A
)
-1
* The EPA emission compliance referred to on the emission compliance label
located on the engine, indicates the number of operating hours for which the
mixing oil*
engine has been shown to meet Federal emission requirements. Category
C = 50 hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours
(Extended).
Throttle Lockout
Lever
Grip
Ignition
Switch
Handle
Throttle
Trigger
Coupler Screw Knob
Figure 2a
meets or exceeds these specifications and is recommended for all
Shindaiwa products.
Spark Plug
Air Cleaner
Fuel Tank
Tank Guard
Latch protector
Latch
M23002a
w/bevel gear
5