Safety instructions
Disconnect the device from the mains:
– Before cleaning and maintenance
– After use
– Before changing a fuse
If you disassemble the device:
– Detach all connections
– Make sure that no voltage is present at any of the inputs and
outputs
The device may not be used if the device itself or the connection
cable are visibly damaged.
If this power cable for this device is damaged, it must be
replaced by the manufacturer, customer service or a similarly
qualified person in order to prevent safety hazards.
This device may only be repaired by qualified personnel.
Inadequate repairs may cause serious hazards.
People (including children) whose physical, sensory or mental
capacities prevent them from using this device safely may not
be allowed to operate it without the supervision of a responsible
adult.
Electrical devices are not toys.
Always keep and use the appliance out of the reach of children.
Children must be supervised to ensure that they do not play with
the device.
NOTICE!
A
Before start-up, check that the voltage specification on the type
plate is the same as that of the power supply.
Never pull the plug out of the socket by the connection cable.
Store the device in a dry and cool place.
2.2
Safety when connecting the device electronically
WARNING!
!
Always use sockets which are grounded and secured by
residual current circuit breakers.
Lay the cables so that they cannot be damaged by the doors or
the bonnet.
Crushed cables can lead to serious injury.
16
PerfectBattery BC100, BC200
EN