Installation - Hayward Aqua Trol AQ-TROL-RJ-CUL Manuel Du Propriétaire

Stabilizer (Cyanuric Acid)
Always check stabilizer (cyanuric acid), when checking salt. These levels will most likely decline
together.

Installation

Installation must be performed in accordance with Local and NEC codes.
Preparing Pool Water
Refer to page 2 for recommended chemical levels. The pool's chemistry must be balanced BEFORE
activating the Aqua Trol. NOTE: If the pool does not have new water, add 1 quart (1 liter) of metal
remover and 1 quart (1 liter) of non-copper based algaecide to the pool, per manufacturers instruc-
tions. This ensures a quick, troublefree transfer to the Aqua Trol system.
Mounting
The Aqua Trol is contained in a raintight enclosure that is suitable for outdoor mounting. The control
must be mounted a minimum of 5 ft. (2 meters) horizontal distance (or more if local codes require)
from the pool.
The control is designed to mount vertically on a flat surface. Because the enclosure also acts as a
heat sink (disperses heat from inside the box), it is important not to block the four sides of the control.
Do not mount the Aqua Trol in a panel or tight enclosed area.
Aqua Trol
6
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS