Introduction; Specifications; Led Description - D-Box KAI-1P Guide D'installation

INTRODUCTION

The KAI-1P device is an audio-class USB peripheral that can play motion on a KineLink platform. The device completely
manages one KineLink platform automatically. The device is seen by the operating system as a normal USB sound card.

SPECIFICATIONS

The KAI-1P has the following specifications:
 Powers directly off the USB bus
USB 2.0-compliant full-speed interface
INDICATORS AND CONNECTORS
1) USB connector
2) USB connection LED (green)
3) Motion streaming LED (yellow)
4) KineLink connector (connect to the motion platform) *Do not connect to a network device*

LED DESCRIPTION

LED Name
USB connection LED
Motion Stearming LED
The LED turns GREEN as soon as the KAI-1P is connected into the USB root or hub and
the host machine has enumerated it (as soon as there is USB communication). It stays on
until the device is disconnected or the host machine is powered-off or put in stand-by mode.
The LED turns YELLOW when the device receives a motion stream from the PC. The LED
is on whether or not a motion platform is connected or active.
Description
4