Condensate Drain Connection - Ferroli AQUA1 PLUS 90 HT Manuel D'installation Et Maintenance

Installation and maintenance manual
5.5.1

Condensate drain connection

Condensate that forms during the operation of the
heat pump flows
discharge pipe (½") that passes inside cladding
and it comes out on the side of the equipment
(Fig. 7).
This must be connected to a duct so that the
condensate can flow freely. (see installation
examples "a" and "b").
Example "a"
Example of condensate drain connection without
siphon
through an appropriate
kit fitting
Condensate
drain duct
Example "b"
Example of condensate drain connection with
siphon
kit fitting
Condensate
drain duct
Siphon
pag. 10 / 19