Standard dimensions for wall mount kits are shown in the table below. When using a third-party wall mount, note that the
assembling screw length(C) is shown below.
Product
Inches
VESA Spec.(A * B)
Family
32
40
48
LED-TV
50
55
65
75
[ Do not install your Wall Mount Kit with your TV is On. This may lead to personal injury caused by electric
shock.
Cautions about Eco Sensor and Screen
Brightness
The Eco Sensor measures the light in the room and optimises the brightness of the TV automatically to reduce power
consumption. This causes the TV to brighten and dim automatically. To turn this function off, go to
.
Eco Sensor
- If the screen is too dark while watching TV in a dark environment, this may be because the Eco Sensor function is on.
- Do not block the sensor with any material. This may decrease the screen brightness.
Storage and Maintenance
- If a sticker was attached to the TV screen, some debris may remain after you remove the sticker. Please clean the debris
off before watching TV.
- The exterior and screen of the product can get scratched while cleaning it. Be sure to wipe the exterior and screen
carefully using a piece of soft cloth to prevent scratches.
Do not spray water directly onto the product. Any liquid
that enters the product may result in product failure, fire, or
electric shock.
C (mm)
20.0 ~ 21.0
200 x 200
20.2 ~ 21.2
19.7 ~ 20.7
20.6 ~ 21.6
400 x 400
19.9 ~ 20.9
20.1 ~ 21.1
20.6 ~ 21.6
English - 5
Standard
Quantity
Screw
M8
4
Clean the product with a piece of soft damp cloth wet with
a small amount of water. Do not use flammable liquids, such
as benzene and thinners, and cleaning agents.
>
>
System
Eco Solution