Using The Rotating Rear Handle; Anti-Jamming Function - GreenWorks Commercial GH 260 Guide D'utilisation

OPERATING

USING THE ROTATING REAR HANDLE

1. Place the hedge trimmer on a
2. Make sure that you released the trigger.
3. Pull the rotation lever and begin turning the rear handle. Release the rotation lever and turn
the handle 90 degrees to either side until it clicks into place and the lever locks in.
4. To turn the handle back to center, pull the rotation lever again, turn the handle slightly,
release the rotation lever and continue turning the handle until it locks into place.
Rotation lever

ANTI-JAMMING FUNCTION

If a branch is lodged in the blade, press the anti-jamming button on the control panel, the
blade will reverse twice, and the branch should be released.
(See Figure 4.)
and even surface.
(See Figure 5.)
12
Fig. 4
Anti-jamming button
Fig. 5