Sage Super Q SBL920 Guide Rapide page 9

Tips
• The inner measuring cap can be removed
and oils/liquids or other ingredients added
during blending. Extreme care must be taken
as depending on the mixture and speeds of
operation, splashes can eject from the lid.
It is not suggested to remove the inner
measuring cap when blending hot liquids.
• Do not exceed the maximum mark when
adding foods and liquids into the blender.
• Use the PULSE | ICE CRUSH button when
food is too thick or coarse to circulate within
the blender jug.
• The scraper and tamper accessories can be
used during blending by removing the inner
measuring cap. Always make sure the main
lid stays firmly in place.
• Ingredients may stick to the sides of the blender
jug. To push food back onto the blades with the
main lid on (inner cap removed), use the tamper
or scraper provided to scrape down the sides of
the jug, and continue blending.
• If any moisture or liquid spills on top of the motor
base during blending, turn the blender off and
unplug from the outlet. Remove the blender jug,
and wipe motor base immediately with a dry
cloth or paper towel.
• The optimum amount of ice cubes that
the blender can process in the jug is 250g
(approximately 1 standard ice tray).
• When the blender has been running for
6 minutes in manual mode with the jug or
30 seconds with the personal blender cup,
it will automatically turn off. This is a safety
feature to protect the motor.
• Thicker mixtures puree more efficiently if the
jug is ¼ to ½ full.
• Do not use metal utensils, as they may damage
the blades or blender jug.
• To remove any food that cannot easily
be scraped out from under the blades,
replace lid and turn blender back on high
speed for 4–5 seconds to spin foods out
from under blades.
EN
9