Manual Operation; Preset Programs - Sage Super Q SBL920 Guide Rapide

MANUAL OPERATION

SPEED CONTROL DIAL
Turn the Speed Control Dial clockwise to select
one of 12 speed settings from a slow STIR through
to a very fast MILL.
To stop blending, turn the Speed Control Dial
anticlockwise back to READY.
The blender is programmed to allow manual
speeds to run for a total of 6 minutes (2.0L Jug)
or 30 Seconds (Personal Blending Cup) before
automatically stopping.
WARNING
Never blend boiling hot liquids. Allow temperature
of ingredients to cool down to room temperature
before placing into blender jug.

PRESET PROGRAMS

PULSE | ICE CRUSH
A program of continuous pulsing designed to chop
food into an even consistency or crush ice cubes.
SMOOTHIE
For dairy-based smoothies. A combination of
speeds and pulses designed to combine and aerate
ingredients into a smooth and creamy texture.
GREEN SMOOTHIE
For blending whole fruits/vegetables into a smooth
beverage. A combination of high speed profiles
breaks down tough fibres into very fine particles.
Use the tamper if ingredients become wedged.
8
CLEAN
PULSE
SMOOTHIE
ICE CRUSH
TIMER
FROZEN
GREEN
DESSERT
SMOOTHIE
FROZEN DESSERT
A high speed program to breakdown frozen fruit/
vegetables into a dessert ready to scoop.
Use the tamper for best results.
SOUP
This program is exclusively for creating a Cold to
Hot Soup–turning whole ingredients at ambient
temperature into a smooth, hot soup. Primarily a
high speed program, the program will finish with
a slow stir to remove steam bubbles.
NOTE
Raw foods such as meats and seafood need to be
cooked prior to using the SOUP program.
WARNING
Do not add hot ingredients when using the
SOUP program.
CLEAN
Use to remove most of the ingredients off the
blender walls and blades. Add 4 cups of warm
soapy water to the blender jug and press the
CLEAN button. For harder to clean, sticky or
thick ingredients, add ½ teaspoon of liquid dish
detergent for extra cleaning power. For best
results, clean the blender jug this way
immediately after use.
+
SOUP