DIGEL HEAT CL-Serie Instructions D'utilisation Et De Montage page 48

9. Connect the infrared heater electrically. Select one of the following control
4.2 /
For
1.
2.
3.
20
components:
Connect the mains plug to a radio socket receiver on a grounded wall
socket.
Connect the power cable (B) to a radio thermostat. WARNING! This
permanent electrical wiring should be set up only by a trained expert.
Connect the power supply cable (B) to an in-wall radio receiver.
Disassembly
Unplug the mains plug (B).
Release the spacers (E) to unhook the infrared heater
Remove the infrared heater (A).
2
E
B
1
3
A
.