DIGEL HEAT CL-Serie Instructions D'utilisation Et De Montage page 45

Mounting the device:
1. Ensure that the bearing capacity of the wall or ceiling is adequate. Ensure
that the wall or ceiling materials are appropriate for installation.
Measure the distance between the center points of the mounting bolts (C)
2.
(The distance may vary depending on the model and can be, for example, 50
cm). Determine the position of the drilling holes in the wall or ceiling to
3. mount the holders (D). For this purpose, use the holders as a template.
Note! Please note that the device is suspended 1.2 m above the floor in the
children's room or in rooms, to which children may have access.
A. Horizontal installation / ceiling installation. Note! The Classic- and
standard model is suitable for ceiling installation.
B. Vertical installation / wall mounting
Distance: e.g. 50
Distance: e.g. 50 cm
17