DIGEL HEAT CL-Serie Instructions D'utilisation Et De Montage page 41

Persons, who are in a bathtub or shower, must never come into contact with the voltage.
High-quality toughened glass is used for glass heaters. This is a mechanically stable safety
glass, which, in the event of damage, breaks into small, less sharp parts. WARNING! Any
mechanical stress on the glasses should be avoided. In the event of damage to the front of
the glass, the heating element must be disconnected from the mains immediately and not
put back into operation. The infrared heater must be disassembled, since there is a risk of
parts falling down.
The device is to be used only within the specified performance limits. Ensure that the
electric circuit can be broken immediately for instance via a circuit breaker or an FI-switch.
Short circuits can cause electric shock.
Keep the device away from flammable materials such as drapes and curtains.
WARNING: No objects should be placed on the infrared heaters or the
heating element should not be covered.
The Digel-Heat towel bars, which
comply with the safety distance, are an exception.
Do not touch heating elements during operation. It may possibly lead to severe burns
because the surface of the infrared heater becomes hot during operation up to 105 ° C.
Protect the plug from being used by third person (especially children).
On the supposition that the device cannot be operated safely, the device must be
switched off and protected against unintentional use.
Disconnect all plugs before cleaning the device. Do not use cloths or chemicals that can
damage the surface. Wipe the housing with a damp cloth. Electrical / electronic parts must
not be cleaned.
Do not attempt to open, modify or repair the device. Do not let it drop, do not drill in,
do not break it up, and do not expose it to high pressure.
No repair works of the infrared heater should be carried out on your own. Always contact
a dealer. Any changes to the device and technical changes are prohibited.
WARNING: The device must not be covered in order to avoid
overheating.
WARNING: The heater must not be installed directly below a wall
socket.
13