Transport - JB Systems Compact Power Série Mode D'emploi

ENGLISH
AVOIDING HUMMING NOISES
In some cases very annoying humming noises can occur. There are some ways to avoid or limit this
phenomenon, below please find some:
 Try using audio equipment with balanced (symmetrical) audio outputs, a balanced audio line is less
sensitive for possible interferences. Of course you should use good quality balanced audio cables!
 If you audio equipment has no balanced output, you can do 2 things:
 Put your audio equipment as close as possible to the subwoofer and use SHORT audio cables.
 Add a good quality DI-box in the audio line to convert the unbalanced cable to a balanced one.
 Put the ground lift switch (6) in the position "lift" to break any possible ground loop. (see previous chapter)

TRANSPORT

The CPX-1510 system is designed to be transported as a very compact
volume.
 Unplug all cables and let the system cool down.
 The CPX-1510SUB has 4 wheels on the back. Put the Subwoofer on its
wheels.
 Place the 2 CPX-1510SAT cabinets on top with the speaker grills facing
down.
 Make sure to secure the complete system during
transport, for example with special ratchet tie down
assembly as shown. (not included!)
SPECIFICATIONS
CPX-1510SAT MID/HIGH CABINETS:
Power Capacity:
Input impedance:
Max SPL:
Frequency response:
Nominal dispersion:
Dimensions (HxWxD):
Weight:
CPX-1510SUB POWERED SUBWOOFER:
Amplifier SUB:
Amplifiers satellites:
Electronic crossover:
Max SPL:
Frequency response:
Dimensions (HxWxD):
Dimensions, castors mounted:
Weight:
You can download the latest version of this user manual on our website: www.jb-systems.eu
JB SYSTEMS
®
Every information is subject to change without prior notice
100Wrms
8Ω
120dB
100 - 20.000Hz
90° x 70° (HxV)
435 x 305 x 440 mm
9.75kg
300Wrms
2x 100Wrms
100Hz ~ 12dB/oct.
128dB
35 - 100Hz
440 x 600 x 590 mm
440 x 600 x 665 mm
42,8kg
5/29
USER MANUAL
CPX-1510