Friedrich Kuhl SQ05 Manuel D'installation Et D'opération page 11

UP and DOWN - arrows - Pressing either
the system's set point (desired room temperature). These buttons are also
used to make system parameter changes later in this manual.
AUTO FAN
AUTO FAN
One press equals 1 degree of change. Holding the button down for more
than 0.6 seconds starts the fast increment/decrement change of the set
point.
TIMER SCHEDULE - The
or function.
SCHEDULE
The button selected during a preset OFF time.
The icon illuminates.
The button selected during a preset ON time.
AUTO FAN
or button changes
74
F
SET POINT
75
F
SET POINT
button allows you to select the TIMER
79
F
SET POINT
The icon illuminates.
The TIMER function (option 1, system default) allows you to de ne a daily
system ON and OFF time window. For example, you can command the
system to turn ON at 8:15 am and turn OFF at 1:30 pm everyday.
The SCHEDULE function allows you to choose either Residential (option
2) or Commercial (option 3). The Residential and Commercial options are
described later in this manual.
OTHER FUNCTIONS
Figure 8
FRR100
FRIEDRICH
AIR CONDITIONING CO.
SAN ANTONIO, TX
SET TIME- To adjust the unit's time press and hold the HOUR and the MIN
FRR101
buttons for three seconds (Refer to Figure 8).
The unit's current hour displays. Use the
hour. To change from AM to PM continue to increment (roll) the display.
Press TIMER SET (Refer to Figure 8) button to display the unit's current
minutes.
FRR122
Use the
for 11:25 AM. Press TIMER SET (Refer to Figure 8) button to display the
unit's day setting.
FRR123
11
25
or buttons to adjust the minutes. The clock is now set
FRR097
AM
FRR128
or buttons to adjust the
FRR129
11