Zephyr Okeanito Guide D'utilisation, D'entretien Et D'installation page 8

C
n .
m i
x . D
m a
Standard
Hood Heights Duct Cover
minimum (A) 30-1/2"
maximum (B) 49-1/2"
Ceiling Heights
minimum (C) 92-1/2" (7' 8-1/2")
maximum (D) 121-1/2" (10' 1-1/2") 149" (12' 5")
DUCTING
Always use rigid type metal ducts only. Flexible ducts
duct run when using elbows, transitions and caps.
ALWAYS, when possible, reduce the number or
transitions and turns. If long duct run is required,
reducer. Reduce duct size as far away from opening as
possible.
If turns or transitions are required; install as far
away from opening and as far apart, between 2, as
possible.
Minimum mount height between range top and hood
A
n .
m i
x . B
m a
It is important to install the hood at the proper
mounting height. Hoods mounted too low could
i n .
a x .
" m
2 6
" m
3 6
mounted too high will be hard to reach and will lose
If available, also refer to range manufacturer's height
clearance requirements and recommended hood
mounting height above range.
"
3 6
Vertical Ducting:
Horizontal Ducting:
Extension
Duct Cover
N/A
44"
77"
106" (8 10"')
DAMAGE-SHIPMENT / INSTALLATION:
• Please fully inspect unit for damage before
installation.
• If the unit is damaged in shipment, return the unit
to the store in which it was bought for repair or
replacement.
• If the unit is damaged by the customer, repair or
replacement is the responsibility of the customer.
be made by arrangement between customer and
installer.
6
www.zephyronline.com