Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Wheel diameter
Hole diameter
Max. wheel thickness
No load speed (RPM)
Rated voltage
Dimensions
(L x W x H)
Net weight
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
•
The shape and weight vary depending on the specifications which differ country to country.
Applicable battery cartridge and charger
Battery cartridge
Charger
•
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
SAFETY WARNINGS
For Your Own Safety, Read
Instruction Manual Before
Operating Tool.
Wear Eye Protection.
Save it for future reference.
General safety precautions (For all tools)
1.
KNOW YOUR POWER TOOL. Read the owner's
manual carefully. Learn the tool's applications
and limitations, as well as the specific poten-
tial hazards peculiar to it.
KEEP GUARDS IN PLACE and in working order.
2.
3.
REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see that keys and
adjusting wrenches are removed from tool
before turning it on.
4.
KEEP WORK AREA CLEAN. Cluttered areas
and benches invite accidents.
With European type safety guard
With safety guard other than
European type
With European type safety guard
With safety guard other than
European type
537 mm x 290 mm x 640 mm
(21-1/8" x 11-3/8 x 25-1/4")
537 mm x 280 mm x 640 mm
(21-1/8" x 11" x 25-1/4")
17.2 - 17.8 kg (37.9 - 39.3 lbs)
15.6 - 16.3 kg (34.5 - 35.9 lbs)
BL1815N / BL1820B / BL1830 / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF
5.
DO NOT USE IN DANGEROUS ENVIRONMENT. Do not
use power tools in damp or wet locations, or expose
them to rain. Keep work area well lighted. Do not use
tool in presence of flammable liquids or gases.
6.
KEEP CHILDREN AWAY. All visitors should be
kept safe distance from work area.
7.
MAKE WORKSHOP KID PROOF with padlocks,
master switches, or by removing starter keys.
DO NOT FORCE TOOL. It will do the job better
8.
and safer at the rate for which it was designed.
9.
USE RIGHT TOOL. Do not force tool or attach-
ment to do a job for which it was not designed.
10. WEAR PROPER APPAREL. Do not wear loose
clothing, gloves, neckties, rings, bracelets, or
other jewelry which may get caught in moving
parts. Nonslip footwear is recommended. Wear
protective hair covering to contain long hair.
11.
ALWAYS USE SAFETY GLASSES. Also use
face or dust mask if cutting operation is dusty.
Everyday eyeglasses only have impact resis-
tant lenses, they are NOT safety glasses.
12. SECURE WORK. Use clamps or a vise to hold
work when practical. It's safer than using your
hand and it frees both hands to operate tool.
2 ENGLISH
DLW140
355 mm (14")
25.4 mm (1")
3 mm (1/8")
3,800 /min
D.C. 36 V
Publicité
Table des Matières
