Adjust Pitch Angle - Hornbach 6145082 Manuel D'installation Et De L'utilisateur

Adjust pitch angle

Loosen the two nuts on the side
of the articulated arm bracket,
by use of a wrench.
Be careful not to remove the
nuts or screws.
Tightening the screw adjusts
the awning towards a straighter
orientation.
Loosening the screw adjusts
the awning towards an inclined
orientation.
Once the desired pitch angle
is set, tighten the two nuts on
the side of the articulated arm
bracket, by use of a wrench.
Repeat the same procedure on
the other side of the awning.
Make sure to adjust the pitch
angle evenly on both sides, so
that the front profile remains
horizontal.
1
2
3
ENGLISH | 105