Classification Key; Din En 1125 Panic Door Locks With Horizontal Push Rod; Ce Marking - Assa Abloy 309N Notice De Montage

Tab. 1 :
Classification key in
accordance
with DIN EN 1125
www.assaabloy.de
/DoP
EN
38

Classification key

DIN EN 1125 panic door locks with horizontal push rod

The properties of locks are described by the ten-digit classification key according to DIN EN 1125.
Tab. 1 explains the classification key.
Class Meaning
3 High usage frequency in situations when there is little incentive to be careful, thus pos-
ing the possibility of accidents or misuse.
7 200,000 test cycles
7 Door mass greater than 200 kg (300 kg)
B Suitable for use on fire and smoke protection doors on the basis of testing in accord-
ance with EN 1634-1
1 Suitable for critical security function
3 High corrosion resistance in accordance with EN 1670:2007 Section 5.6
2 See DIN EN 179, because this standard specifies stricter intrusion protection
requirements
2 Approved for handle bar / push bar projecting up to 100 mm (normal projection)
A/B Panic door lock with
· A · handle bar actuation
· B · push bar actuation
A/B For installation in
· A · double-leaf doors in the active leaf (lock with unlocking pin)
(certification procedure still pending)
· B · single-leaf doors (lock without unlocking pin)

CE marking

C
0432-CPR-00007-15
DIN EN 1125:2008
ASSA ABLOY
Sicherheitstechnik GmbH
Bildstockstraße 20
72458 Albstadt
DEUTSCHLAND
2015
3 7 7 B 1 3 2
—
A A
2
B B
Information