Using The Child Safety Feature; Setting The Display To Stand-By Mode - Atag OX30 11C Mode D'emploi

Masquer les pouces

Table des Matières

Les langues disponibles

In order to prevent your oven being turned on unintentionally, you may

lock the controls.

To do this:

- Press on the START/STOP touch control until it bleeps.

Keep pressing on the touch control until the bleep stops and a key

appears

(key)

-To unlock the controls, repeat the operation.

-Press the START/STOP touch control until you hear a long bleep.

Keep your finger on the touch control until the bleep stops and

the

NOTE: Only the "separate timer" program remains operational.

setting the display to stand-by mode

To reduce your oven's power consumption to a minimum when it is not

in use, you can put your readout system in STANDBY MODE.

To carry out this operation, proceed as follows:

GOING INTO STANDBY MODE:

- Your oven must be in normal time readout mode.

- Press both the + and - controls for five seconds at the

same time.

- The display reads "Lcd off".

- Take your fingers off the two controls.

- 30 seconds later your readout will switch off.

Your oven is now in standby mode; whenever you are in the normal time

readout mode, it will turn off automatically after 30

seconds.

COMING OUT OF STANDBY MODE:

- Your oven must be in the normal time readout mode.

- Press the + and - controls for five seconds at the

same time.

- The display will then read "Lcd on".

- Take your fingers off the two controls.

- You are now out of the STANDBY MODE; the readout is now perma-

nently lit.

how to use your oven