Maintenance; How To Keep Your Oven In Shape - Furrion FSRI22LA-SB Manuel D'installation

Maintenance

How to keep your oven in shape

Before cleaning your oven, or performing maintenance, disconnect it from the power
supply.
To extend the life of your oven, it must be cleaned frequently, keeping in mind that:
● Do not use steam equipment to clean the appliance.
● The enameled or stainless steel parts should be washed with lukewarm water
without using any abrasive powders or corrosive substances which could ruin
them; Stainless steel could get stained. If these stains are difficult to remove, use
special products available on the market. After cleaning, it is advisable to rinse
thoroughly and dry.
● The inside of the oven should preferably be cleaned immediately after use, when
it is still warm, with hot water and soap; the soap should be rinsed away and the
interior dried thoroughly. Avoid using abrasive detergents (for example cleaning
powders, etc...) and abrasive sponges for dishes or acids (such as limescale-
remover, etc...) as these could damage the enamel. If the grease spots and dirt are
particularly tough to remove, use a special product for oven cleaning, following the
instructions provided on the packet.
● If you use your oven for an extended period of time, condensation may form. Dry it
using a soft cloth.
● There is a rubber seal surrounding the oven opening which guarantees its perfect
functioning. Check the condition of this seal on a regular basis. If necessary,
clean it and avoid using abrasive products or objects to do so. Should it become
damaged, please contract your nearest After-sales Service Center. We recommend
you avoid using the oven until it has been repaired.
● Never line the oven bottom with aluminium foil ,as the consequent accumulation
of heat could compromise the cooking and even damage the enamel.
● Clean the glass door using non-abrasive products or sponges and dry it with a soft
cloth.
17