Dometic RM5310 Instructions De Montage page 31

RM5310, RM5330, RM5380
WARNING!
!
 To ensure that you are operating the device safely, read the
operating manual carefully and observe the instructions in the
operating manual.
 Do not operate the device if it is visibly damaged.
 If this device's power cable is damaged, it must be replaced
by the manufacturer's customer service or a similarly qualified
person in order to prevent safety hazards.
 This appliance may only be repaired by qualified personnel.
Inadequate repairs may cause serious hazards.
 Never open the absorber unit. It is highly pressurised and can
cause injuries when opened.
 If silicone sealant or similar is used, make sure it is processed
cleanly and without residue. If silicone threads come into
contact with hot parts or naked flames, there is a risk of fire.
 Never check the device for leaks with an open flame.
 Use only propane or butane gas (no natural gas).
 The device may only be operated at the pressure specified on
the type plate. Use a DIN-DVGW-approved pressure regulator
with permanent settings in line with DIN EN 12864.
 Dismantle all refrigerator doors when disposing of the old device
and leave the grids in the refrigerator to prevent anyone from
being locked in accidentally and suffocating.
CAUTION!
!
 Danger of crushing! Do not put your fingers into the hinge.
NOTICE!
A
 Check that the voltage specification on the type plate is the
same as that of the power supply.
 Never pull the plug out of the socket by the connection cable.
 Only connect the unit to the AC mains with the appropriate
connection cable.
 Only use cables with the appropriate cable cross section:
 The cooling device is not suitable for transporting substances
which are caustic or contain solvents.
 Protect the device and the cable against heat and moisture.
 The device may not be subjected to rain.
EN
Safety instructions
31