Memory - Suunto S6 Mode D'emploi

2. Press Suunto. The On/Off field is activated.
3. Change the field to either On or Off with the arrow buttons and press Suunto.
When the weather alarm goes on, the alarm symbol flashes and the backlight goes
on. To acknowledge the weather alarm, press any of the buttons.

3.4.5. Memory

The memory automatically stores weather-related information from the last 48 hours.
When you scroll through the stored information, it is presented in the following order:
• Maximum sea level air pressure during the period measured, time and date.
• Minimum sea level air pressure during the period measured, time and date.
• Maximum temperature during the period measured, time and date.
• Minimum temperature during the period measured, time and date.
• Sea level air pressure and temperature in relation to the time and date, starting
from the current moment. The first 6 hours are displayed in 1-hour intervals, the
next 42 hours in 3-hour intervals.
NOTE: If the Use function has been set to Alti (altimeter), the barometric value
stored in memory is always the same.
To view the weather information stored in the memory:
1. In the Function menu, scroll to Memory with the arrow buttons and press Suunto.
The first information page is displayed.
2. Scroll the information with the arrow buttons. (The up arrow scrolls forward and
the down arrow backward.)
3. To stop viewing the memory content, press either Suunto or Stop/CL at any time.
37