Opening/Closing The Cover At The Side Of The Hydrogroup; Accessories; Operating Lamp; Monitor / Workstation With Light Pole - CASTELLINI SKEMA 6 Instructions De Service

Masquer les pouces Voir aussi pour SKEMA 6:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7.7. Opening/closing the cover at the side of the hydrogroup

Opening the cover:
• Grasp the handle [ h ] and pull it up to unlock the cover [ a ] at the side
of the hydrogroup.
• Turn the cover outwards to open it.
Closing the cover:
• Press the handle [ h ] to block the cover until a click is heard.

8. Accessories

8.1. Operating lamp

Operation and care instructions for the lamp are enclosed with the equi-
pment.
8.2.

Monitor / Workstation with light pole

Instructions on how to use the monitor/workstation are enclosed with the
dental unit.

8.3. Air/water/230V quick-connect couplers

The air/water/230V quick-connect couplers are placed to the side of the elec-
trical box.
ATTENTION!
Shut off the equipment before attempting to connect or disconnect the
air/water outlets.
Technical specifi cations:
• Electrical outlet: 230Vac 2A, in accordance with standard IEC/EN 60320-2-
2/F.
• Air quick-connect coupler pressure: 6 Bar.
• Water quick-connect coupler pressure:
- municipal water,
- with S.S.S. system,
- with M.W.B. system,
• Water quick-connect coupler delivery rate:
- municipal water,
- with S.S.S. system
,
- with M.W.B. system
NOTE:
with the S.S.S. system: in order to use the quick-connect coupler with municipal
water shut off the distilled water tank (see paragraph 7.2.).
138
138
138
GB
GB
SKEMA 6
- OPERATING INSTRUCTION
2.5 Bar
3Bar
3 Bar
1800 ml/min
950 ml/min
400 ml/min

Publicité

Table des Matières
loading

Table des Matières