Festo SPC200 Série Guide Rapide page 15

Removing modules
1. Switch off the compressed air supply and the operat
ing voltage supply.
2. Loosen and pull off the connecting cable on the front
of the module.
3. Unlock both retaining levers by pushing them back
(see following diagram).
4. Grip the module by the front plate and pull it out.
5. If necessary, seal the unused slots with blanking
plates.
1
Direction for un
locking
2
Locks automati
cally
3
Retaining lever
4
Front plate of the
module
5
Terminal strip
6
Guide rail
Festo SPC200−SMX−1 0309a English
1
2
3
4
5 6
15