Festo SPC200 Série Guide Rapide page 13

1 User
The stepping motor indexer module type SPC200−SMX−1
has been designed for coupling a stepping motor to the
SPC200 Smart Positioning Controller. The stepping motor
indexer module provides connections for both reference
switches and limit switches as well as for a stepping motor
controller.
Detailed information on the SPC200, the stepping motor
module and electric axes can be found in the user manual
P.BE−SPC200−.., in manual P.BE−SPC200−SMX−1−.. as well
as in the manuals for the components used.
Caution
Always observe the safety instructions in the specified
manuals and descriptions,
and the designated use of the relevant components
and modules.
Caution
If the permitted operating conditions of the compo
nents used are not observed, faults may occur during
operation.
Consider in particular the specifications for the per
mitted operating conditions of the motors and drives
used in the documentation enclosed (manufacturer
data), e.g. for the permitted start−stop frequency or the
minimum positioning speeds.
Festo SPC200−SMX−1 0309a English
instructionsEnglish
13