Hornbach 10179647 Manuel D'installation Et De L'utilisateur page 104

Awning 1x
Measure the distance between
the outsides of the articulated
arm brackets.
Mounting bracket 2x
(e.g. in concrete)
The mounting brackets 2 must
be installed level and at least
250 cm above the ground.
The distance between the in-
sides of the mounting brackets 2
is x + 4 cm.
Mark the installation holes of
the mounting brackets 2 on the
According to your wall type, drill
the holes and install the fasten-
Install the mounting brackets
2 at the fastenings and check
them for secure fixation.
Alternatively the mounting
brackets 2 can be installed to
a ceiling, using its two upper
104 | ENGLISH
1
2
5 cm
wall.
3
ings.
holes.
Outside of brackets = x
Only for version 10179662
and 10179648: Fix the third
mounting bracket centered
between the outer brackets.
=
x + 4 cm
=