Symbols And Safety Warnings; Main Components - Efco ARTIK 56 Manuel D'utilisation Et D'entretien

damage the machine and constitutes a
serious risk to people and property.
13) It is forbidden to hitch tools or applications
that are not specified by the manufacturer.
14) Do not use the machine without the
protective cover of the rotating blades.
15) Keep all danger and safety labels in perfect
condition. If they become damaged or
worn, replace them immediately.
16) Do not utilise the machine for uses
different from the ones specified in this
manual (see Prohibited uses on page 31).
17) It is the user's responsibility to evaluate the
potential risks that may arise in the area to
be worked on. I t is also the user 's
responsibility to take all the necessary
precautions to ensure his/her safety,
particularly on slopes, uneven or slippery
land and loose ground.
18) 18) Make sure you have a firm foothold
when working on slopes. Work across
slopes, never ascending or descending. Do
not use the machine on land with a
gradient of more than 10° (17 %).
19) Please note that the owner or the user is
responsible for any accidents or damage to
third parties or their property.
20) When operating the machine on steep
slopes, the user must ensure that nobody is
located within a 20 metre radius of the
machine.
21) The machine can be fitted with different
accessories. It is the owner's responsibility
to ensure that these tools or accessories
conform to applicable European safety
regulations. Using non-certified accessories
can jeopardise your safety.
22) D o n o t b e co m e d i s t r a c te d o r l o s e
concentration during work.
23) When operating the rotary cutter, make
sure there is nobody in front of or near the
machine.
24) Do not operate the equipment without
wearing adequate winter garments.
WARNING
- Never use a machine with faulty safety
e q u i p m e n t . T h e m a c h i n e 's s a f e t y
e q u i p m e n t m u s t b e c h e c k e d a n d
maintained as described in this section. If
your machine fails any of these checks
contact an Authorised Service Centre to
get it repaired.
- Any use of the machine not expressly
e nv i s a g e d i n t h i s m a n u a l i s t o b e
considered improper and therefore a
source of risk to people and property.
2. SYMBOLS AND SAFETY
WARNINGS (Fig.1)
1.1) Carefully read the instruction manual
before using the machine.
1.2) Warning! Risk of thrown objects - Keep
bystanders at a safe distance.
1.3) Warning! Mutilation hazard - Moving
cutter and impeller; do not insert hands or
feet inside the cutter and impeller housing.
1.4) Warning! Danger injury – Disconnect the
spark plug wire, and consult operator's
instructions book before per forming
repairs or maintenance.
1.5) Warning! Moving parts. Mutilation
Danger – Don't touch when rotation. Shut
off engine before clearing discharge chute.
1.6) Warning! Moving parts. Mutilation
Danger – With the machine running, keep
away clothes, hands and feet from rotating
parts.
1.7) Warning! Risk of hearing damage –
Compulsory use of hearing protection.
The dataplate (Fig. 54) displays the essential
data of each machine:
54.1) Type of machine: SNOW THROWER
54.2) Specifications
54.3) Machine brand and model
54.4) Guaranteed sound power level
54.5) CE conformity marking
54.6) Serial number
54.7) Year of manufacture
3. MAIN COMPONENTS (Fig.2-27A)
1. Traction lever
2. Drive handle
3. Operated cutter lever
4. Snow chute
5. Oil tank cup
6. Gasoline tank cup
7. Headlight (ARTIK 56 EL - 62-70 ELD - 72
ELDT)
I
GB
F
D
E
SK
P
GR
TR
CZ
RUS
UK
PL
27