Installing Windows - ASROCK P43D1600Twins-1394 Mode D'emploi

2 . 9 2 . 9 2 . 9 Serial A Serial AT T T T T A (SA Serial A A (SA A (SA A (SAT T T T T A) / Serial A
2 . 9 2 . 9 Serial A Serial A A (SA
Installation Installation Installation Installation Installation
This motherboard adopts Intel
(SATA) / Serial ATAII (SATAII) hard disks. You may install SATA / SATAII hard disks on
this motherboard for internal storage devices. This section will guide you to install the
SATA / SATAII hard disks.
STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard's SATAII
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard
disk.
It is not recommended to switch the "Configure SATAII as" setting after OS
installation.
2 . 1 0 2 . 1 0 Driver Installation Guide Driver Installation Guide
2 . 1 0 2 . 1 0 Driver Installation Guide 2 . 1 0 Driver Installation Guide Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical drive
first. Then, the drivers compatible to your system can be auto-detected and listed on
the support CD driver page. Please follow the order from up to bottom side to install
those required drivers. Therefore, the drivers you install can work properly.
2 . 1 1 2 . 1 1

2 . 1 1 Installing Windows

Installing Windows Installing Windows Installing Windows
2 . 1 1 2 . 1 1 Installing Windows
Vista Vista Vista Vista Vista 64-bit W 64-bit W 64-bit Without RAID F 64-bit W 64-bit W
TM TM TM TM TM
If you want to install Windows
SATA / SATAII HDDs without RAID functions, please follow below procedures according
to the OS you install.
Since Windows
AHCI function is not supported under Windows
2.11.1 2.11.1 2.11.1 Installing Windows Installing Windows Installing Windows
2.11.1 2.11.1 Installing Windows Installing Windows
W W W W Without RAID F ithout RAID Functions ithout RAID F ithout RAID F ithout RAID F
If you want to install Windows
without RAID functions, please follow below steps.
2 8 2 8 2 8
2 8 2 8
A) / Serial AT T T T T AII (SA A) / Serial A A) / Serial A AII (SA AII (SAT T T T T AII) Hard Disks AII (SA
A) / Serial A AII (SA
®
ICH10 south bridge chipset that supports Serial ATA
2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista
®
ithout RAID F ithout RAID F ithout RAID F ithout RAID Functions unctions unctions unctions unctions
®
2000 / XP / XP 64-bit / Vista
® 2000 AHCI driver is not provided by the chipset vendor,
2000 / XP / XP 64-bit 2000 / XP / XP 64-bit 2000 / XP / XP 64-bit
2000 / XP / XP 64-bit 2000 / XP / XP 64-bit
®
unctions unctions unctions unctions
®
2000 / XP / XP 64-bit OS on your SATA / SATAII HDDs
ASRock Motherboard
AII) Hard Disks AII) Hard Disks AII) Hard Disks
AII) Hard Disks
/ / / / /
TM TM TM TM TM
TM TM
/ Vista 64-bit OS on your
® 2000.