Before First Use
• Remove all packaging material and check whether the
appliance is complete.
• Place the appliance on an even, non-slippery and heat
resistant surface.
• Fully unwind the power cord (11) and make sure that the
power cord (11) underneath the appliance is clamped into
the cable guide (10).
• Connect the appliance to a properly installed wall socket.
• Set the browning control (3) to the maximum setting and
slide down the toasting lever (2) until it clicks into place.
Do not insert any slices of bread during this first use and
let your toaster heat up for 3-4 minutes.
• After this preheating process, let the appliance completely
cool down and clean it as described under Cleaning and
Care.
Note: During this process, the appliance may briefly produce
some smoke or smell which is due to residues on the heating
elements left over from the manufacturing process. This is
normal and not harmful. Make sure that the room is well
ventilated.
Warning: Plastic bags are a danger to toddlers and
babies, therefore keep them away to avoid suffocation.
Instruction Manual
ENGLISH
21