Preventive Maintenance - General International BT8005 Manuel D'installation Et D'utilisation

PREVENTIVE MAINTENANCE

Keep your tool in good condition by adopting a regular maintenance
program.
● Before use, examine the general condition of your tool.
● Inspect blades, switches, tool cord and extension cord for damage.
● Check for loose screws, misalignment, binding of moving parts,
improper mounting, broken parts, and any other condition that may
affect its safe operation.
● If abnormal noise or vibration occurs, turn the tool off immediately and
have the problem corrected before further use.
● Do not use a damaged tool.
● Never disassemble the tool or try to do any rewiring on the tool's
electrical system.
● Contact General International for all repairs.
● Clean dust and debris from vents.
● Keep the tool handles clean, dry and free of oil or grease.
● Use only mild soap and damp cloth to clean your tool since certain
cleaning agents and solvents are harmful to plastics and other insulated
parts. Some of these harmful solvents include: gasoline, turpentine,
lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia,
and household detergents containing ammonia.
WARNING! Never use flammable or combustible solvents around tools.
WARNING! To reduce the risk of injury, electric shock and damage to
the tool, never immerse your tool in liquid or allow liquid to flow inside the
tool.
12