Technical Information - ARDES AR372 Mode D'emploi

Do not use the heater in presence of flammable substances (petrol,paints, etc.).
Do not place the cord near sources of heat.
In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this
appliance must not be supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on and off by the utility.
WARNING: DO NOT COVER THIS PRODUCT NEAR CURTAINS OROTHER
COMBUSTIBLE MATERIAL.
WARNING: DO NOT COVER THE APPLIANCE OR OBSTRUCT THE AIR
INLETS TO AVOID OVERHEATING.
DO NOT COVER
This product has been manufactured in conformity to current 2006/95/
EC and 2004/108/EC
Technical data indicated on the appliance.
WALL INSTALLATION.
Kit provided:
- steel bracket 450 X 50 mm
- 3 screws 40 x 4 mm
- 3 wall plugs
The appliance must be positioned so that the air emission grid situated at
the top is completely free and away from the ceiling, shelves or any other
obstacle.
Perforate the wall (Ø 7 mm), insert the plastic plugs and fasten the steel bracket
with the specific screws supplied.
The screws must be an equal distance of 203 mm apart. There are three holes on
the corners and the centre of the bracket: use the central hole.
After mounting the bracket to the wall, make sure that it is well fixed to hold the
weight of the appliance and prevent falling and damage.
Hook the appliance by matching the slots at the back of the appliance with the
bracket hooks.
Handle the appliance with care.
OPERATING INSTRUCTIONS.
Before connecting and disconnecting the appliance, make sure that the
function switch is in the OFF position.
To switch on the appliance, insert the plug in the power socket. Move the switch to
ON and then select the ON-OFF switch (1) on the control panel situated at the back
left of the appliance.

TECHNICAl INFORMATION

INSTRUCTIONS FOR USE
7