Switching The Product On And Off - Candy CFNI3760E Mode D'emploi

FROST FREE FRIDGE FREEZER WITH DIGITAL DISPLAY
Open the top door of the fridge in order to access the control panel.

SWITCHING THE PRODUCT ON AND OFF

The product is electronically powered by connecting the power cable to the power outlet and remains powered on until cable is removed.
When " - " is displayed on the digital display, it indicates that the product is in stand-by mode, therefore it is connected to the power outlet but it is
not functional. To switch the appliance on, press the MODE button. To turn the product back to standby mode, press the MODE button for a few
seconds. When the product is in standby mode, any food in your fridge or freezer will not be cooled.
Once the product is switched on, the appliance will set the recommended temperature for the fridge compartment on the display +5°C. For the
freezer compartment, the product will automatically set the freezer to the recommended temperature of -18°C.
MODIFYING THE TEMPERATURE OF THE FRIDGE COMPARTMENT
It is possible to modify the temperature by pressing the buttons (+) and (-). The maximum temperature is 7, and the minimum is 1. The manufacturer's
recommended temperature is 5.
When the temperature of the fridge compartment is being set, the word FRIDGE fl ashes. By pressing the button + from 7 to 1 you will fi nd the
OFF mode with which it will be possible to switch off the fridge compartment. The display will only show the temperature set for the freezer
compartment. In order to reactivate the fridge compartment press the MODE button until the fridge mode stops blinking, at this point it will
be possible to change the temperature of the fridge compartment.
MODIFYING THE TEMPERATURE OF THE FREEZER COMPARTMENT
It is possible to switch from Fridge to Freezer mode by pressing the MODE button. The word FREEZER will now be displayed. Subsequently, the
recommended temperature -18 will be displayed. It is possible to modify the temperature from -16°C to -22°C.
To modify the temperature, press the buttons (+) and (-) until you reach the desired temperature. The display temperatures are only
indicative.
CONTROL PANEL
5 EN 5 IT
(Figure 1)
(Figure 2)