Krups KM 8005 Mode D'emploi page 10

TROUBLESHOOTING
PROBLEM
The coffee does not brew or the
machine does not switch on.
Appliance appears to be leaking.
It takes a long time to brew.
SOLUTION
• Check to ensure the appliance is plugged into a
working outlet, and the appliance is in the «ON»
position.
• The water tank (a) is empty.
• There was a power failure.
• There was a power surge. Unplug the machine,
then plug it back in.
• The clock must be reset after a power failure.
• The Auto-Off function switches off the coffee
maker. Switch off the coffee maker then switch it
back on to make more coffee. For more
information, refer to the section « Making
coffee ».
• Water tank (a) is not in place.
• Drawer is not closed properly.
• Drawer has been opened during brewing : press
On/Off button (m) to restart.
• Make sure that the water tank (a) has not been
filled beyond the max. fill level.
• It may be time to descale your coffee maker.
• Numerous minerals may accumulate in the coffee
makerʼs circuit. Periodic descaling of the machine
is recommended. More frequent descaling
may be necessary depending on the hardness of
the water. For more information, refer to the
"Descaling" section.
NOTE: do not dismantle the machine.
English
7