Technical Specifications - RIB MASTER WI-FI ACG6094 Mode D'emploi

T
ROUBLESHOOTING
All of the LEDs on the MASTER Wi-Fi are off
During memorization of the safety devices the buzzer sounds for 3/5 second
During memorization of the safety devices the buzzer sounds 2 twice
When giving a command the buzzer sounds 3 times
When giving a command the buzzer sounds 4 times
The buzzer sounds 5 times when the strip connected to the photocell receiver is
pressed
When giving a command the buzzer sounds 5 times
The buzzer emits a sound every 3 seconds and the blinker during the gate operation
flashes 2 times in succession followed by a pause of 3 seconds for 1 minute and one
of the dual-color leds is ignited red fixed
The gate doesn't move, the buzzer emits an alternating sound and the blinker
flashes 2 times in succession followed by a pause of 3 seconds for 1 minute and one
of the dual-color leds is ignited green-red alternated
LED DL2 is off and one of the dual-color LED EDGE emits a constant green light
The buzzer does not sound when the batteries are removed from the strip
The door does not open or close and one of the dual-color LEDs emits a constant
green light
The door does not open or close, the buzzer emits an alternating sound and the
blinker flashes 2 times in succession followed by a pause of 3 seconds for 1 minute
and one of the dual-color LEDs alternates red and green
The strip connected to the photocell transmitter or receiver does not work as a safety
device
T
ECHNICAL SPECIFICATIONS
- POWER
- APPLICABLE TENSION ON CONTACT J4 120/220/230V 50/60Hz
- APPLICABLE TENSION ON CONTACT J2 24V ac/dc
- ABSORPTION AT REST
- MAXIMUM ABSORPTION
- WORKING TEMPERATURE
- SIZE
- WEIGHT
- SIZE
- WEIGHT
PROBLEM
12/24 Vac/dc
10 mA
100 mA
-20°C ÷ +60°C
96x43x20 mm
(code ACG6094)
0,042 kg
(code ACG6094)
125x55x28 mm
(code ACG6099)
0,090 kg
(code ACG6099)
Ensure that 12 or 24 V ac/dc power is present to the power feed terminals of the
MASTER Wi-Fi
It has been tried to memorize a safety device with wrong microswitch.
Verify that the dual-color led that flashes on MASTER Wi-Fi corresponds at the
safety device microswitch to memorize.
A safety device is already in the memory
No safety device has been memorized, memorize at least one
or
the DIP corresponding to the safety devices memorized on the MASTER Wi-Fi card
are OFF. Turn them to ON
Possible cable missing between the MASTER Wi-Fi and the door control card:
Blinker to card connection wires detached, or
Strip to card connection wires detached, or
Photocell to card connection wires detached, or
Radio control for pedestrian gate opening not completely closed
Contact configuration error with the strip connected to the photocell receiver
Resistance not connected in series with the N.C. contact of the strip connected to the
photocell receiver, or
Wires detached on the strip with N.O. contact, or
Resistance not connected in series with the N.C. contact of the strip, or
Wires detached on the strip with N.O. contact connected to the photocell receiver
Replace the batteries of the photocell(s) or the strip(s) as they are low
Replace the batteries of the photocell(s) or the strip(s) as they are exhausted
Wires detached on the strip with N.C. contact
or
Ensure that there is resistance of 8,2kΩ in series with the N.O. contact of the strip
connected to the photocell receiver
Ensure that the micro-switch on the MASTER Wi-Fi corresponding to the strip is in
the ON position
Photocell is not aligned or it is engaged. The batteries in the photocell transmitter
are exhausted, or
resistance of 8,2 kΩ is not connected in series with the N.C. contact or in parallel with
the N.O. contact of the strip connected to the photocell transmitter, or
resistance of 8,2 kΩ is not connected in parallel with the N.O. contact of the strip
connected to the photocell transmitter
Photocell or strip receiver batteries are exhausted
Check the correct setting of the jumper of the photocell transmitter/receiver. If the
jumpers are correctly setting, remove and put again the batteries.
SAFETY DEVICES AND SIGNALING RADIO FREQUENCY SIGNAL
TECHNICAL INFORMATION
- FREQUENCY
- SENSITIVITY
- EMITTING POWER
- MODULATION TYPE
- RANGE
COMMAND ACTIVATION RADIO FREQUENCY SIGNAL TECHNICAL
INFORMATION
- FREQUENCY
- SENSITIVITY
- MODULATION TYPE
- RANGE
25
25
CHECK
868,3 MHz
-108 dBm
<25 mW
FSK
20 m in open spaces
433,92 MHz
-107 dBm
OOK
100 m in open spaces with antenna
G
B