Trouble-Shooting; Lupo - Struers RotoForce-3 Mode D'emploi

Display/Error
RotoForce-3
OVERLOAD
PAUSE/
OVERLOAD
PAUSE/
NO AIR
LOCK HANDLE
Japanese Texts

Lupo

Bad or missing
dosing
Lubricant leaking
below the bottle
RotoForce-3
Instruction Manual

3. Trouble-shooting

Cause
RotoForce-3 is stopped due to overloading of
the motor.
The motor has cooled down after overloading
and RotoForce-3 is ready for use.
Air pressure too low.
The handle has not been pulled and
RotoForce-3 is at the moment unlocked.
RotoForce-3 has the possibility of showing the
screen texts in Japanese. When choosing a
European language in the LANGUAGE menu,
you might accidentally press m MENU at the
Japanese option.
Dosing nozzle clogged.
The bottle has not been fastened correctly
Action
Wait for the motor to cool down and the
PAUSE/OVERLOAD message will appear
on the display.
Restart RotoForce-3.
Supply correct air pressure and restart.
Lower handle.
To return to English, German or French
texts, just follow this procedure:
o
n Press STOP
.
m
n Press MENU
two times.
L
n Press SELECT
language you prefer.
o
n Press STOP
.
Clean the nozzle with alcohol.
Fasten tightly.
Remember to hold back the socket cap
itself to avoid damage to the bottom gasket
until you reach the
19