Specifications - Insignia NS-R2111 Guide De L'utilisateur

4 Run the wire through the trench to the
amplifier.
5 Connect the speaker wire to the terminals on
the back of your amplifier.
Make sure that the polarity of the speaker
wires are connect correctly.
• amplifier + (positive, red) to speaker red
wire (positive)
• amplifier - (negative, black) to speaker
black wire (negative)
6 Turn your amplifier on and test the system
with your favorite music. If the speakers are
operating properly, refill the wire trench.
4

Specifications

Speaker type
Tweeter
Woofer
Impedance
Sensitivity
Frequency response
Power recommendation
Dimension (W×H×D)
Weight
Copyright
© 2007 Insignia. Insignia and the Insignia logo are
trademarks of Best Buy Enterprise Services, Inc. Other
brands and product names are trademarks or registered
trademarks of their respective holders. Specifications and
features are subject to change without notice or obligation.
For service and support call (877) 467-4289.
www.insignia-products.com
Insignia NS-R2111 Outdoor Rock Speakers
Weather-resistant rock speaker
1-inch (25.4 mm) coaxial tweeter with
poly-ether imide (pei) diaphragm
6.5-inch (165 mm) driver with
polypropylene cone and rubber
surround
8 ohm
90 dB
70 Hz - 20 kHz
5 - 100 Watt
13.0 × 9.65 × 7.7 inches
(330 × 245 × 195 mm)
8.6 lbs (3.9 kg)